Shoot longer between reloads with this extended magazine for the Ruger SR9. It is made of heat treated steel with a blued finish and holds 32 rounds of 9mm Luger ammunition. Some components of the magazine are molded from advanced polymer material. It uses a special anti-fatigue spring that can hold the magazine loaded and ready to use for many years.
Specifications and Features
ProMag RUGA34 9mm Luger 32 rounds capacity
Steel construction with polymer components
Anti-fatigue spring
Blued
Fits: Ruger SR9
Specifications and Features
ProMag RUGA34 9mm Luger 32 rounds capacity
Steel construction with polymer components
Anti-fatigue spring
Blued
Fits: Ruger SR9
33 Ratings
Don't buy this crap! Stick with Ruger factory mags
These do not work!Bought two of them. Both of them failed to feed on the very first use at the range. Not only did they fail to feed, but they both wound up causing me to release the mag, and then take every round out of them because there were some in them backwards after shooting a couple times with some regular Winchester ball ammo. 115grGreat price. Won't be using them any more.
July 6, 2023
Quality product
Strong construction and spring. Packed in a thick protective anti-rust lubricant in a sealed plastic bag. Very good product. Feeds well in the firearm.
March 12, 2023
Ruger PC Charger extended mag
Great extended mag for my Ruger PC Charger 9mm
November 23, 2022
Love it
Love it definitely recommend
November 18, 2022
Follower doesn’t keep angle. Rounds jam after 15-20 are loaded.
Follower doesn’t stay straight and rounds fall out of angle and jam up inside the box after 15-20 rounds are loaded.
October 2, 2022
Good for range and Ideal for home defense
Great quality. Great if and when SHTF. Runs a little hot, suggest practicing with hand on mag well.
August 13, 2022
Good replacement mags.
They are decent, but make sure you count your ammo as you load it. It will hold more than 32 rounds but it won’t function properly.
July 24, 2022
Work well
These work really well in my Ruger PC Cabine
July 15, 2022
almost twice as good as the 17 round mags
I use these in my PC9. They feed well and so far no jams or stovepipes.And the 32 rounds keep the fun going when the 17 rounders stop.
June 21, 2022
Ruger SR9 32 Round Magazine
Great product made of metal. Also has retention hole for Ruger firearms.
May 6, 2022
Works great after first few rounds of a full magazine.
There is a flange at the forward edge that catches on the cartridge as it tries to load the bullet into the barrel. This only seems to happen on the first few rounds. I will try to add a bevel to this edge to see if that works better.Once I got past this issue, it was nice to not need to exchange magazines as often.
April 29, 2022
So far, it has fed my sr9 perfectly. Hope to try it in a PCC soon
April 12, 2022
Super hard springs , hope they get easier to load
They look good ,but man the 32 round mags became a chore to get past 25 or so rounds and the 17 round mags were tight also really having to force to get the full 17 rounds in . Promag uses some heavy duty springs so right now they are all loaded to the max and sitting , with any luck it will compress the springs some . I purchased a loader for future loading as my thumbs are still numb after two weeks .
March 14, 2022
Worked great!
The magazine worked very well in my carbine. I had no problem loading all 32 rounds with a mag speed loader. The magazine fit perfect in the gun and fired every round without failure. I will be ordering another one.
February 19, 2022
Don’t slap it in like your AR!!
I slapped these in to make sure they were in my Ruger PC Carbine and apparently bent something in there. Gunsmith fixed it pretty quick but still. Good quality clip. Just a little loose. No issues with the mag feeding the ammo.
December 20, 2021
Unimpressed
My purchase didn’t work out at all. The clip doesn’t click into place. The spring is weaker than I hoped for. Very disappointed with the SR9 extended mag.
July 29, 2021
Very nice a little heavy!
Fired around 50 rds through mine so far. No jams as of yet. Fun to shoot. May buy a third! Pros: Flows off smooth. Cons: Kinda on the heavy side
December 10, 2020
Didn't have the hole where the clip locks and jams, trash
Don't waste the money, you can make one yourself better than this
June 24, 2020
i like this mag works great
home protection
June 12, 2020
Weak spring. Last 10 rounds won't feed
Last 10 rounds won't feed in Ruger PC carbine. Rounds flip, point up and base down while still in the mag. Mag spring seems much weaker than Ruger OEM mags.
January 16, 2020
Jams
I've gone shooting using this clip a few times now. Every single time I did, it would jam the Ruger SR9 I was shooting after every 1-5 shots. Occasionally it'd run a little longer, maybe 10 rounds in a row, but never have I been able to dump the mag without about a quarter to a third of the rounds jamming. No matter how slow or fast I shoot or whether I hold the mag, it always jams. Maybe I just got a lemon and there's something just slightly wrong with it, but I will not purchase another one of these mags.
December 28, 2018
Quality Magazine
I shot over 100 rounds with this clip the day I got it in the mail. Never had one misdeed or misfire in my Ruger PC 9mm carbine. Bought a second one because they are kinda hard to find. Pros: No reloading as often Cons: Makes gun little heavy when fully loaded
October 14, 2018
I would like to buy this
Do this magazine fit emp Springfield 9mm
June 22, 2018
Works great with the PC 9!
As with many here, I just bought a Ruger PC 9 Carbine. These mags fit very well and feed like a dream. These are hard to find anywhere but CTD!
April 30, 2018
Great for the Ruger PC 9 Carbine
I purchased the ProMag SR9 32 round magazine specifically for my Ruger PC9 Carbine. I have purchased three so far from cheaperthandirt.com and I can say I am not disappointed. They work flawlessly in the carbine and are a great Buy. I will be buying more
March 20, 2018
Higher capacity!
I bought this for my Ruger PC Carbine. Which shares Mags with the Ruger SR9. Higher capacity!
February 16, 2018
Feeds reliably
Before buying 32 round magazine the reviews were a mixed bag. Let me set the record straight. This magazine feeds as good and reliable as the standard 17 Round clip even running reloads through it. I run strictly brass casing through my Ruger 9E because aluminum tends to not eject reliably so I can't say how aluminum will be. But I find this product a must have.
February 15, 2018
Great high capacity fun!
This is a blast to use with my new ruger sr9e.It feeds brass fmj great but havent tried any other kind yet.I would buy this product again. Pros: Holds 32 rounds of 9mm! Cons: Gun a little heavy to shoot when fully loaded
January 29, 2018
can't wait for my next purchase.
couldn't find this product anywhere but here.
October 31, 2017
Would buy another
4 stars bease first bullet jam but then ran off 95 smooth as silk.
August 15, 2017
Works great with brass casings
Works well with brass casings but will not feed chamber with Winchester steel casing ammo i have tried. Otherwise flawless feed with brass so far Great product
May 1, 2017
I haven't had the chance
I haven't had the chance to try it out but my first impression of it is 1 it actually holds 36 rounds hates hollow points when loaded to max capacity hangs up on first few rounds but looks mean in the SR9 and is almost equally long as two standard 17rd mags stacked on top of each other locks in weapon securely will update after function
February 2, 2017
It does fit in the gun an
It does fit in the gun and hold 32 rounds that's the only reason it get 1 star, there is so little spring tension that the bullets don't stay tight at all the they stick and jam everytime, out of ruger sr9 and sr9c
December 2, 2016
Will it fit the SR9C with the adapter?
Answer:
It will fit the SR9c but you would not be able to use the grip sleeve like you do with the factory extended magazine.
Will this fit in the Ruger9E ?
Answer:
Yes this will fit.
Would this fit snug on a Ruger SR9c?
Answer:
Yes this will fit. However, this magazine will extend past the bottom of the magazine well.
Hi sr.i really want to know will this 32 round magazine fit my sr9c?
Answer:
Yes this will fit.
Will the SR9 32 round Magazine fit the 9mm 9E?
Answer:
Yes this will fit.
will the sr9c still fire with this magazine?
Answer:
Yes this magazine is compatible with the SR9c.
Will this fit a sr9c?
Answer:
Yes it will
will it work in a 9e?
Answer:
Yes this will fit.
Is this compatible with the Ruger ec9s?
Answer:
No this will not fit. Try item # 2-MGPMRUG17 or 2-MGRUG90404.
Will this fit a Ruger EC9S ?
Answer:
no it will not.
Will this fit a Sar 9?
Answer:
No this will not fit.
Will this fit a Security nine ?
Answer:
No this will not fit. Try item # MAG-428-443.
Is this for SR9C?
Answer:
Yes this will fit. However, the magazine will extend past the magazine well.
Will this fit the ruger max 9?
Answer:
No this will not fit. Check out item # 135855.
Will this fit my RUGER PC CARBINE 9mm?
Answer:
If you have the SR9 mag well installed, then yes it will fit.
Can it fit sr9c?
Answer:
Yes this will fit. However, the magazine will extend past the magazine well.
Im wondering if this will fit American Ruger Compact 9mm?
Answer:
Will it fit LC9?
I need an extended clip for my Ruger security 9. Do you have one?
Answer:
No, the highest capacity magazine we have in stock for your firearm holds 17 rounds. Check out item # 115819.
Will this fit the 9e?
Answer:
Yes it will.
Can you suggest a clip for a security 9mm??
Answer:
I recommend item # 115819.
Does it fit the pc9 charger?
Answer:
If you have the SR9 mag well installed, then yes it will fit.
Will it fit a ec9s?
Answer:
No this will not fit. I recommend item # MAG-428-151.
Will this work in the PC Carbine?
Answer:
If you have the SR9 mag well installed, yes it will.
Will this fit a 9e?
Answer:
Yes it will.
Will this fit a sr40c?
Answer:
No it will not. See item# MAG-428-203
Will it fit LC9/EC9?
Answer:
No it will not. Try item MAG-428-151
What magazine should I get for a ruger security 9mm?
Answer:
No this will not fit the Security 9.
I just bought a PC9 Carbine and it came out of the box with a Security 9 magazine that you say should not be used!?
Answer:
The Ruger PC9 has had several versions over the years of which they have used different magazines. to my knowledge the Security 9 mag has not been an option. it was likely a SR9 mag. We recommend reaching out to Ruger with your serial number for clarification on which magazine pattern will work for your PC9.
Will it fit the ruger 9e?
Answer:
Yes it will.
Will this fit the sr9c?
Answer:
Yes it will.
Is it compatible with a ruger LC9?
Answer:
No it is not.
I Have a m&p 9mm Shield what extended mag i need too get ??
Answer:
If you have a standard M&P9 Shield or M&P9 Shield 2.0 then you can use item# MAG-428-420 or MAG-428-390. Please note: These will not fit the M&P9 Shield EZ or the M&P9 Shield Plus. Extended magazines are not currently available for the M&P9 Shield EZ or the M&P9 Shield Plus.
Does this fit ec9 model?
Answer:
No it does not.
For SR9C?
Answer:
Yes it will fit.
Will it fit the ec9s?
Answer:
No this item will not fit the Ec9s. I would recommend Item number MAG-428-151.
Does this fit my ruger security 9 9mm?
Answer:
No it does not.
Will this magazine fit my Ruger 9mm PC carbine?
Answer:
If you have the SR9 mag well installed, yes it will.
Does this fit a pc carbine?
Answer:
If you have the SR9 magwell installed these mags will work. They are not compatible with the GLOCK magwell.
Will this fit the new PC Carbine?
Answer:
Only if it already accepts SR9 magazines
wii it for a Ruger EC9s or ruger prescott az usa
Answer:
No it will not fit.
will this fit a p95dc 9mm?
Answer:
No it will not
Will this fit my sr9c?
Answer:
Yes it will
Does this magazine fit in a ruger 9mm PC charger?
Answer:
Yes it will if it has the adapter to accept Ruger SR9 magazines
Do you have one of these that will fit a Ruger Security 9?
Answer:
Not at this time
Will this fit a SR40c?
Answer:
No it will not. You need item# 18206
Will it fit my 9e?
Answer:
Yes it will.
I got a ruger security 9 will this fit my Gun it takes a double stack clip the standard clip I got holds 10.
Answer:
No it will not
Will this fit the ruver american compact 9mm
Answer:
No it will not
Will this fit my stoeger str-9 9mm .? If not which magazine would fit my gun .?
Answer:
The Stoeger STR-9 takes STR-9 magazines,
So this mag is for the Ruger security 9
Answer:
No. It's for the SR9. The Security 9 uses a different mag pattern.
can you use this with pc9 carbine
Answer:
As long as you have the SR9 mag well kit installed, yes.
will this pro mag ruger sr9 32 round mag fit my ruger pc charger 9mm gun. if not what mag do i need to purchase
Answer:
It will fit your PC Charger if your PC Charger is set up to take SR9 magazines
Will this mag fit the security 9mm ruger
Answer:
No it will not.
Does this mag fit and work in Ruger SR9C?
Answer:
Yes it will
Will this fit my SR9C?
Answer:
Yes it will fit.
Does it fit p95 9mm ?
Answer:
No, you would need ProMag Ruger P Series Magazine 9mm Luger 32 Rounds, item # MAG-441
Is it a double stack like the 17 round clip
Answer:
Yes, this is a double stack magazine for a Ruger SR9.
Will the pro mag fit 9mm ruger 9E
Answer:
Yes it will.
Will it fit a kahr cw9?
Answer:
No it will not.
Can this magazine work for a Ruger Security-9?
Answer:
No it cannot.
Will this fit full size ruger American 9mm
Answer:
No it will not.
Will this function in my PC Carbine?
Answer:
Yes
Hello, does this magazine fit my RUGER PC CHARGER, 9MM. PISTOL? id like to know for sure before I buy it
Answer:
Yes
Does is fit a ruger security 9
Answer:
No it does not.
Does this fit model 3810 for security 9
Answer:
No it does not.
Does this work with sr9c?
Answer:
Yes
Will this fit the ruger american 9mm compact?
Answer:
No.
Will magazine fit a ruger EC9s 9mm?
Answer:
No.
Will the clip fit a ruger 9e??
Answer:
Yes
Will this fit Ruger Ec9s
Answer:
No.
Will it fit ruger 9e?
Answer:
Yes it will.
How long is it
Answer:
About 12"
Will it fit the 9e?
Answer:
Yes it will.
Will this fit a ruger pc 9 carbine?
Answer:
Yes
Will it fit in the ruger Security 9 if I cut a slot on the slide like the original ruger Security 9 magazines
Answer:
No, more than likely it won't.
I own a Ruger Security 9c. The 9c magazine has a different magazine and not all Ruger Magazines work. Will this work with the 9c to match with PC9. Thank you
Answer:
The Ruger Security 9 pistol takes Ruger Security 9 Magazines. The Ruger SR9 pistol takes Ruger SR series magazines. The Ruger PC Carbine has an adapter that will allow both Ruger SR9/Security 9 Magazines to work. But this is only for the PC Carbine and does NOT mean the pistol magazines interchange between the pistols.
Will it fit a ruger security- 9 ?
Answer:
No it's wouldn't stay cause it's missing a slot on the right side near the six
Will this fit a sr9c and will it shoot without jamming?
Answer:
It will fit and yes it should..
Will this fit a ruger ec9s? Is there any drum magazines that will fit a ruger ec9s?
Answer:
No, and no.
Will this fit a security 9
Answer:
No it will not.
Will it fit a 709 slim 9mm
Answer:
No, it will not.
Does this clip fit a ruger sr9e ?
Answer:
Yes it will.
Will this clip fit into a 9mm semi automatic pistol grip riffle???? Need help ASAP!!!
Answer:
That's entirely depend on which rifle.
Will this fit my Ruger Ec9s
Answer:
No it will not. Try item MAG-428-151 and MAG-3751
Will this fit my Ruger 9e?
Answer:
Yes, it will fit the 9e.
I just got the Ruger PC Carbine 9mm will it fit?
Answer:
Yes it will.
Is this legal to own in WA state?
Answer:
We are unable to provide legal advice, please ask someone familiar with your local laws.
Will it work with the security 9 or is the sr9 the same thing?
Answer:
No, it will not.
I just bought this clip but the spring is loose and jams the bullets so what can I do to fix this or do I need to send it back
Answer:
Please contact CustomerService@cheaperthandirt.com to arrange for a return or exchange.
Will it for the sr9c?
Answer:
Yes it will.
I have ruger 9e pistol will this clip work?
Answer:
Yes it will.
I have a Smith & Wesson model 5906. Will this work with it ?
Answer:
No, you cannot use a Ruger magazine in your S&W.
How well does this function in the new (Dec 2017) Ruger PC Carbine?
Answer:
It should work just fine in the PC Carbine.
Will it fit in the Lc9
Answer:
No, it only fits the SR9.
Will it fit an American ?
Answer:
No. You cannot use SR9 magazines in an American.
How long is the 32 round mag??? 12 inches??? I'd like to purchase a mag pouch.
Answer:
It is about 9.75" long.
Does the magazine lock into position as most Ruger Magazines do or will it pull out without releasing it? There should be the same hole drilled out on the side to prevent the magazine from falling out.
Answer:
It will lock into position.
Is the SR9 extended magizine interchangeable with the 9E ruger?
Answer:
Yes. The magazine can be used in the SR9, SR9c and 9E.
Will it fit in ruger sr9c 9mm
Answer:
Yes this magazine will work in an SR9c. It will stick out quite a bit.