Leapers Inc. has been supplying the shooting hunting and outdoors community with quality gear for over 20 years. They have risen to become a leading manufacturer of stocks, products and accessories for a wide variety of firearms. The Leapers UTG brand has become synonymous with unique and innovative hunting and shooting accessories at an affordable price point. Leapers/UTG is dedicated to being an industry leader in high quality firearms accessories at a price you can afford!
This is a Leapers UTG Super Slim Picatinny AR-15 Riser Mount. It has a 1" Saddle Height and 13 Slots. It is 5.5" in Length. This Super Slim Picatinny AR-15 riser mount Is precision machined from aircraft grade aluminum and finished in a matte black hard coat. Its continuous rail edge design allows the installation of multiple riser mounts side by side to form one continuous picatinny rail. It utilizes locking torx screws and square-shaped integral recoil stops for a secure zero hold.
Features and Specifications:
Manufacturer Number: MT-RSX1L
Leapers UTG AR-15 Super Slim Picatinny 1" Riser Mount 13 Slot Black
6061-T6 Aircraft Grade Aluminum
Distinctive Scalloped Picatinny Slots
Continuous Rail Edge Design
Utilizes Locking Torx Screws
1" Saddle Height and 13 Picatinny Slots
Includes a T20 Torx Wrench for a Simple and Friendly Installation
Material: Aluminum
Weight: 2.83 oz
Rail Type: Picatinny/Weaver
Length: 5.5 inch
Width: 1.1 inch
Height: 1 inch
Color: Matte Black
Fits:
Picatinny/Weaver Rail
Unconditional Lifetime Warranty
This is a Leapers UTG Super Slim Picatinny AR-15 Riser Mount. It has a 1" Saddle Height and 13 Slots. It is 5.5" in Length. This Super Slim Picatinny AR-15 riser mount Is precision machined from aircraft grade aluminum and finished in a matte black hard coat. Its continuous rail edge design allows the installation of multiple riser mounts side by side to form one continuous picatinny rail. It utilizes locking torx screws and square-shaped integral recoil stops for a secure zero hold.
Features and Specifications:
Manufacturer Number: MT-RSX1L
Leapers UTG AR-15 Super Slim Picatinny 1" Riser Mount 13 Slot Black
6061-T6 Aircraft Grade Aluminum
Distinctive Scalloped Picatinny Slots
Continuous Rail Edge Design
Utilizes Locking Torx Screws
1" Saddle Height and 13 Picatinny Slots
Includes a T20 Torx Wrench for a Simple and Friendly Installation
Material: Aluminum
Weight: 2.83 oz
Rail Type: Picatinny/Weaver
Length: 5.5 inch
Width: 1.1 inch
Height: 1 inch
Color: Matte Black
Fits:
Picatinny/Weaver Rail
Unconditional Lifetime Warranty
6 Ratings
UTG riser is great.
Leapers UTG for the win. This is the right height for me, much faster and natural position for my neck and truly helps when using a gas mask. Leapers mount is tough and light. 3 locking lugs that grab well and its weight is hardly noticed.
May 19, 2024
Risers to get the scopes off the deck.
Bought these risers for both my Del Ton AR15 & KEL-TEC CMR30 rails. So far on the KT it works just as planned. The Leupold Scout scope sets forward on the rail & this riser gives me perfect height for eye relief. I’m positive it will get the scope up off the rails of the AR15 equally well. Very satisfied with the UTG riser.
March 29, 2023
Scope relief.
Mounts easily and holds the scope securely. Brought the scope up to the proper height for my eye level.
January 17, 2023
Great Riser
Looks good, and so far their holding up just fine.
February 21, 2022
Excellent item
Easily installed. Excellent fit for both rifle rail and scope rings. Light weight.
October 6, 2018
This riser is excellent.
This riser is excellent. 3 torx screws (with a little blue loc-tite) securely hold. Mounted to an AR upper is the perfect look and feel with the 13 slots and at only 3 ounces.
March 1, 2017
But could I use the iron sites with it in case I needed to, is that an option with this?
Answer:
Probably not. It will depend on which sights you have and the sight height. This is only a 1" riser. a typical sight height would be about 2.6" over bore and about 1.4" off the rail.
Will this get my scope above the a-frame front site?
Answer:
If you have a red dot optic, this mount will move the front sight to the lower third portion of the objective. While you may still see the front sight, it will be much less prominent. However, magnified scopes do not typically interfere with A2 style front sights and this mount may not be necessary.
Does it make scope clear front sight?
Answer:
Yes, including ring height, the scope would clear the front sight.
Does this fit S&W M&P-15 Sport II?
Answer:
Yes it could.
I just bought a dpms oracle ar-15. I was wondering if this type of riser would fit my rifle?
Answer:
Yes it will