If you think about it, “fire” is a powerful word. Yell it into a crowd and you could find yourself in serious trouble. Get stranded in the wilderness without it and you will experience a different kind of trouble. Fire is critical if you are hiking or camping. We rely on it for heat, light, cooking, purifying water, and sometimes, for the protection it can offer.
It can be extremely difficult to make a fire or downright child’s play depending upon what you have on hand and the situation. Making a fire is pretty much a science project if you think about it because a fire, any fire, needs the same four basic ingredients in order to start:
Making a fire using matches and dried tinder is really nothing to write home about. However making a fire without matches is kind of cool and almost MacGyver-like in some cases. One such method is the Coke and a chocolate bar method.
I should probably offer a disclaimer here because my first reaction was, “If I am in a survival situation and have a Coke and a chocolate bar I am certainly not going to sacrifice these treats to start a fire.” That was the chocoholic side of my brain talking. Truth is, if you are in a desperate situation you will do just about anything to start a fire, even if it means gnawing off your big toe. So, now that I have your taste buds’ attention, here is how to build a fire using the Coke can and chocolate bar method.
Any type of soda can will work so Pepsi drinkers need not worry. It is the aluminum can we are using, not the contents (an aluminum beer can will also work).
The amount of sunlight and how polished the can determines how long this takes. Be sure to gather plenty of tinder, kindling and sticks to help turn the smoldering tinder into flames.
You just need three ingredients and a little sunlight.
- Open your canned beverage and enjoy the contents.
- Take a good sized bite out of your chocolate bar and savor the flavor as you imagine warming yourself next to a toasty fire, because you will not be able to eat it afterward.
- Flip the can upside down, take the chocolate bar, and gently but firmly begin to rub the bottom of the can with the bar of chocolate. If it melts it is okay.
The chocolate acts like a burnishing solvent to help polish the dull metal can into a shiny reflective device. If you do not have a chocolate bar, you can use other types of abrasives such as toothpaste or cleanser. The wrapper of the chocolate bar works well for rubbing in the chocolate. Scrub the bottom of the can with the chocolate or other abrasive.
- Rinse and repeat until you have turned the dull finish into a shiny polished finish.
- Hold the polished bottom of the can at an angle to reflect the sunlight (think magnifying glass).
- Hold the polished can about one inch away from some dried fire tinder until you have smoke.
WARNING: NEVER eat the chocolate bar or toothpaste AFTER you use it to polish the bottom of the can as it contains TOXIC levels of aluminum and is NOT safe for consumption.